HPT6590WS

Usage:

• Use the appropriate ¼ x ¼ cable strip tool for the cable being terminated.
• Push the connector onto the cable by utilizing the appropriate integrated insertion port located on the front of your HPT tool.
• Release the latch on the tool lever, allowing the lever to swing open so that you are able insert the connector and cable.
• Insert the connector into the plunger tip and push the cable down through the 360 degree connector support dogs.
• Start to close the handles of the tool together.
• As the handles close, the plunger slides toward the dogs.
• When the handles are fully closed together, the connector has been terminated.
• Open handles to remove the connector.
• Back the connector away from the plunger slot and grasping the cable behind the connector, lift the assembly out of the tool.